Setting up Big-IP LTM for first time

Got the shiny new LTM Big-IP 1600 from F5. Just getting the box setup notes. Will write more as I setup the box to do the actual work.

IP setting and all can be done from the LCD menu presumably as well, I used the console connection.

Step A. Console Connection

To configure a serial terminal console for the BIG-IP system, perform the following procedure:

  1. Connect the null modem cable to the console port on the BIG-IP system.
  2. Connect the null modem cable to a serial port on the management system with the terminal emulator.
  3. Configure the serial terminal emulator settings according to the following table:
Setting Value
Bits per second [baud] 19200
Data Bits 8
Parity None
Stop Bit 1
Flow Control None
The default root password is default, and the preferred default IP address is 192.168.1.245

Step B. Configure IP settings.


After logging into console, type config

That opens up IP settings menu, easy to follow.

Step C: HTTPS access and licensing:

https://<IP&gt;

At the login prompt, type admin for the user name, and admin for the password.

The Licensing screen of the Configuration utility opens.

Network config first, give hostname, change password.

then license activations- > takes to f5 site, enter dossier….

That is it, you are ready to start configuring and load balancing.

I would most more as I work on setting this up.

Thanks for reading.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: